Что же делать, если нам необходимо добавить какой-либо модуль? Правильно, нужно пересобрать nginx вручную. О том как это правильно сделать в Linux написано в данной статье.
Предположим, для примера, что нам необходимо добавить в nginx модуль http_mp4_module. Вывод команды nginx -V покажет нам, что nginx собран без него.
Код: Виділити все
# nginx -V
Код: Виділити все
nginx version: nginx/1.2.1
TLS SNI support enabled
configure arguments: --prefix=/etc/nginx --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log
--http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi
--http-log-path=/var/log/nginx/access.log --http-proxy-temp-path=/var/lib/nginx/proxy --lock-path=/var/lock/nginx.lock
--pid-path=/var/run/nginx.pid --with-pcre-jit --with-http_gzip_static_module --with-http_ssl_module --with-ipv6
--without-http_browser_module --without-http_geo_module --without-http_limit_req_module --without-http_limit_zone_module
--without-http_memcached_module --without-http_referer_module --without-http_scgi_module --without-http_split_clients_module
--with-http_stub_status_module --without-http_ssi_module --without-http_userid_module --without-http_uwsgi_module
--add-module=/tmp/buildd/nginx-1.2.1/debian/modules/nginx-echo
Код: Виділити все
# wget http://nginx.org/download/nginx-1.2.1.tar.gz
Код: Виділити все
# tar –xvf nginx-1.2.1.tar.gz
# cd nginx-1.2.1
Для Debian/Ubuntu выполняем:
Код: Виділити все
# aptitude install build-essential
Код: Виділити все
# yum install gcc gcc-c++ kernel-devel
# yum groupinstall 'Development Tools'
Для этого копируем из текстового редактора вывод команды nginx -V начиная с --prefix= и до первого --add-module= (все присутствующие в выводе --add_module= нам не нужны). После чего пишем в консоли ./configure и вставляем скопированное из редактора. Должно получиться так:
Код: Виділити все
./configure --prefix=/etc/nginx --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log
--http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi
--http-log-path=/var/log/nginx/access.log --http-proxy-temp-path=/var/lib/nginx/proxy --lock-path=/var/lock/nginx.lock
--pid-path=/var/run/nginx.pid --with-pcre-jit --with-http_gzip_static_module --with-http_ssl_module --with-ipv6
--without-http_browser_module --with-http_geoip_module --without-http_memcached_module --without-http_referer_module
--without-http_scgi_module --without-http_split_clients_module --with-http_stub_status_module --without-http_ssi_module
--without-http_userid_module --without-http_uwsgi_module
Код: Виділити все
./configure --prefix=/etc/nginx --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log
--http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi
--http-log-path=/var/log/nginx/access.log --http-proxy-temp-path=/var/lib/nginx/proxy --lock-path=/var/lock/nginx.lock
--pid-path=/var/run/nginx.pid --with-pcre-jit --with-http_gzip_static_module --with-http_ssl_module --with-ipv6
--without-http_browser_module --with-http_geoip_module --without-http_memcached_module --without-http_referer_module
--without-http_scgi_module --without-http_split_clients_module --with-http_stub_status_module --without-http_ssi_module
--without-http_userid_module --without-http_uwsgi_module --with-http_mp4_module
--------
В процессе конфигурирования возможно будут появляться ошибки. Способы их устранения описаны ниже.
Ошибка:
Код: Виділити все
./configure: error: the HTTP rewrite module requires the PCRE library.
You can either disable the module by using --without-http_rewrite_module
option, or install the PCRE library into the system, or build the PCRE library
statically from the source with nginx by using --with-pcre=<path> option.
Код: Виділити все
# aptitude install libpcre++-dev
Код: Виділити все
# yum install pcre-devel
Код: Виділити все
./configure: error: SSL modules require the OpenSSL library.
You can either do not enable the modules, or install the OpenSSL library
into the system, or build the OpenSSL library statically from the source
with nginx by using --with-openssl=<path> option.
Код: Виділити все
# aptitude install libssl-dev
Код: Виділити все
# yum install openssl-devel
Код: Виділити все
./configure: error: the GeoIP module requires the GeoIP library.
You can either do not enable the module or install the library.
Код: Виділити все
# aptitude install libgeoip-dev
Код: Виділити все
# yum install GeoIP-devel
Код: Виділити все
./configure: error: the HTTP XSLT module requires the libxml2/libxslt
libraries. You can either do not enable the module or install the libraries.
Код: Виділити все
# aptitude install libxslt1-dev
Код: Виділити все
# yum install libxslt-devel
Код: Виділити все
./configure --prefix=/etc/nginx --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log
--http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi
--http-log-path=/var/log/nginx/access.log --http-proxy-temp-path=/var/lib/nginx/proxy --lock-path=/var/lock/nginx.lock
--pid-path=/var/run/nginx.pid --with-pcre-jit --with-http_gzip_static_module --with-http_ssl_module --with-ipv6
--without-http_browser_module --with-http_geoip_module --without-http_memcached_module --without-http_referer_module
--without-http_scgi_module --without-http_split_clients_module --with-http_stub_status_module --without-http_ssi_module
--without-http_userid_module --without-http_uwsgi_module --with-http_mp4_module
После успешного окончания конфигурирования увидим на экране что-то вроде:
Код: Виділити все
nginx path prefix: "/etc/nginx"
nginx binary file: "/etc/nginx/sbin/nginx"
nginx configuration prefix: "/etc/nginx"
nginx configuration file: "/etc/nginx/nginx.conf"
nginx pid file: "/var/run/nginx.pid"
nginx error log file: "/var/log/nginx/error.log"
nginx http access log file: "/var/log/nginx/access.log"
nginx http client request body temporary files: "/var/lib/nginx/body"
nginx http proxy temporary files: "/var/lib/nginx/proxy"
nginx http fastcgi temporary files: "/var/lib/nginx/fastcgi"
Код: Виділити все
# make
# make install
Код: Виділити все
# /etc/nginx/sbin/nginx -V
Код: Виділити все
nginx version: nginx/1.2.1
TLS SNI support enabled
configure arguments: ./configure --prefix=/etc/nginx --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log
--http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi
--http-log-path=/var/log/nginx/access.log --http-proxy-temp-path=/var/lib/nginx/proxy --lock-path=/var/lock/nginx.lock
--pid-path=/var/run/nginx.pid --with-pcre-jit --with-http_gzip_static_module --with-http_ssl_module --with-ipv6
--without-http_browser_module --with-http_geoip_module --without-http_memcached_module --without-http_referer_module
--without-http_scgi_module --without-http_split_clients_module --with-http_stub_status_module --without-http_ssi_module
--without-http_userid_module --without-http_uwsgi_module --with-http_mp4_module
Останавливаем nginx:
Код: Виділити все
# service nginx stop
Код: Виділити все
# mv /usr/sbin/nginx /usr/sbin/nginx_back
Код: Виділити все
# mv /etc/nginx/sbin/nginx /usr/sbin/nginx
Код: Виділити все
# rm -r -f /etc/nginx/sbin
Код: Виділити все
# nginx -V
Код: Виділити все
nginx version: nginx/1.2.1
TLS SNI support enabled
configure arguments: ./configure --prefix=/etc/nginx --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log
--http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi
--http-log-path=/var/log/nginx/access.log --http-proxy-temp-path=/var/lib/nginx/proxy --lock-path=/var/lock/nginx.lock
--pid-path=/var/run/nginx.pid --with-pcre-jit --with-http_gzip_static_module --with-http_ssl_module --with-ipv6
--without-http_browser_module --with-http_geoip_module --without-http_memcached_module --without-http_referer_module
--without-http_scgi_module --without-http_split_clients_module --with-http_stub_status_module --without-http_ssi_module
--without-http_userid_module --without-http_uwsgi_module --with-http_mp4_module
Код: Виділити все
# service nginx start
Код: Виділити все
# cd ../
# rm -r -f nginx-1.2.1